My photo
I have just finished studying Entertainment Design Crafts at Cleveland College of Art and Design where I specialised in the design and creation of props and set for film, TV and theatre.

Sunday, 18 March 2012

Sculpting His Head

This was going to be tricky. The only way I could think of getting as much detail in that I wanted was to sculpt his head out of clay (remembering that the head is the most important part and will portray the emotion of the scene). Little did I know how much time it would take!! It took, all in all, a week and a day until I got around to making a cast from it... I am extremely pleased with they way it turned out though. Here are a few images (of the hundreds there are - believe me!) of the creation of my sculpt:

I started by creating a basic shape out of polystyrene. I drew around the paper template I made for the previous polystyrene head and took it back an inch or so. By the time I had finished shaping it, I had probably taken off another good few centre meters. I decided to use polystyrene instead of creating a wire armature inside because it would be lighter (less clay), less expensive (less clay), and quicker to sculpt (less clay).

However, before I started to sculpt over the top of it, I needed something to represent eyes. I found a polystyrene ball (good ol' polystyrene) which was a perfect size. The only problem was, there was only one and it was soft. So, I made a two part plaster mould and mixed Polyester Gelcoat with Artex to create something quite similar to car body filler. I created two casts from these, one half eye and one full one (this way I could see which one works best) and then I started to sculpt:

I took the original polystyrene head I had created and made it slightly smaller and more in proportion to the rest of his body. This way, when I was creating the clay sculpt, I could keep referring back to the polystyrene version to make sure it was the right size.

I kept adding more and more clay on to try and get his basic face shape looking realistic. I had covered up one eye somewhere along the line so I re-opened that and tried adding a little bit of detail on:

It was all going wrong and I needed a fresh start so I took away some of the clay and started again. This time, I thought I would try and get the finished side of his face done first so that I knew where the muscles would sit on the un-finished side of the face (now I know that I should have done it all at once which would have been quicker and easier but we learn from our mistakes, right?) Anyway, I got to a stage where I was happy with his finished side:

I kept referring back to my polystyrene head to make sure it was the correct size and just out of curiosity, I compared it with my head at this stage:

Not too bad!

So now I started on the un-finished side (this was the longest part and the hardest to get right) I made sure I had muscle reference next to me so that it would be mostly correct (of course, I am never going to be able to get it absolutely bang-on accurate because I have no idea what the inside of a face looks like! Luckily for me, neither do the majority of people so in the end, I decided it just had to look 'right'... but still mostly accurate):

I tried getting the basic shape and the basic outlines but it just wasn't sitting right! Everything was wrong and more importantly it looked wrong. So I decided I would tweak the parts on the finished side so that I was completely happy with it and continue working on the un-finished half the next day (oh, now I know better - work on both sides at once!!) I added an ear which I was very happy with and smoothed his face down and added skin texture (which I created by taking a latex cast of an orange):

At this point, I was pretty pleased with it (if I ignored the un-finished side) and started to work on the other side. I knew however, that this side was all wrong and there was no saving it. It would be better for me to start again... so that's what I did...

Now then, I needed some teeth (or perhaps that was just an excuse to leave it alone for an hour or two) but in my head, if I had the teeth, I could position the jaw correctly and work from there. So, I made some teeth from Sculpey (these were just for the sake of the sculpt and I was planning on creating more realistic teeth later on):

It still wasn't sitting right with me so I took it all off and started again:

I was starting to like the shape, especially the detail around the top of his head. Once I had put this in, the rest started to fall in place. One thing that was making it all so difficult was that I had become attached to the finished side of his face and didn't want to add or take any more clay on / away from it. Unfortunately though, the other side of his face just wasn't corresponding with this finished side. A lot of it was protruding far too much and it didn't look like the same face. So, I had to add more clay on to the finished side which would allow me to balance out the other side...

I was having so much trouble with his face around the nose and jaw area that I decided to just get rid of it and take it back down to the skull.

And that was it! I had finally finished it! Some parts were starting to crack but this wasn't a problem, I would be able to fix it just before I started to cast it and hopefully it wouldn't show up. So, here's the finished sculpt:

I'm pretty pleased with it myself!

1 comment:

  1. Been through to Hartlepool today to see the end of term show. Really liked your work,great sculpting. I've just finished a year of Foundation at CCAD in Middlesbrough and have signed up for the Entertainment Design Crafts course for September !!! Super stuff !!!!